🔥 Popular | Latest

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. : honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame.

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canister...

Save
caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. a word of caution about the plywood though… I just reblogged a post earlier today saying that if a rubber bullet hits that and shatters it, the splinters can put you in more danger. depending on how you’re holding it up, it can also damage your arm if you’ve strapped it on somehow, and carrying a shield can make you a target for them to shoot things at, so it might actually be safer on the whole if you don’t try to construct a shield, counter intuitive though that may seem. It’d be a shame if I reblogged this and people read it: caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. a word of caution about the plywood though… I just reblogged a post earlier today saying that if a rubber bullet hits that and shatters it, the splinters can put you in more danger. depending on how you’re holding it up, it can also damage your arm if you’ve strapped it on somehow, and carrying a shield can make you a target for them to shoot things at, so it might actually be safer on the whole if you don’t try to construct a shield, counter intuitive though that may seem. It’d be a shame if I reblogged this and people read it

caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves...

Save
honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. : honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame.

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas caniste...

Save
ruxiecat121: love-buckybarnes: A group of people were traveling in a boat. One of them took a drill and began to drill a hole beneath himself. His companions said to him: “Why are you doing this?” Replied the man: “What concern is it of yours? Am I not drilling under my own place?” Said they to him: “But you will flood the boat for us all!” (Quoted in Midrash Rabbah, Vayikra 4:6). It’s basically saying how one person’s action has a ripple affect of other people, much like the domino effect, one bad deed will affect many lives in a negative way. There’s a saying I learned a long time ago as a child. I didn’t understand it as well then as I do now.“Your freedom to swing your arm stops the moment your arm hits my face.” : ruxiecat121: love-buckybarnes: A group of people were traveling in a boat. One of them took a drill and began to drill a hole beneath himself. His companions said to him: “Why are you doing this?” Replied the man: “What concern is it of yours? Am I not drilling under my own place?” Said they to him: “But you will flood the boat for us all!” (Quoted in Midrash Rabbah, Vayikra 4:6). It’s basically saying how one person’s action has a ripple affect of other people, much like the domino effect, one bad deed will affect many lives in a negative way. There’s a saying I learned a long time ago as a child. I didn’t understand it as well then as I do now.“Your freedom to swing your arm stops the moment your arm hits my face.”

ruxiecat121: love-buckybarnes: A group of people were traveling in a boat. One of them took a drill and began to drill a hole beneath...

Save
maichancreating: 「弥勒」I don’t exactly know how I ended up here but I think I gave Miroku the wrong power, guys lmao.  Originally, I was gonna have the wind tunnel peep through Miroku’s glove thing as the beads unravelled, but I thought it would darken the piece up too much since, you know, a black hole that consumes all things in its wake is not exactly the greatest light source for a dramatic piece like this.  So instead, I put a lightning stringy thing flying about because I liked the movement and Miroku’s canon black hole did not help me in lighting composition  :’’’’’’D Hope you guys still like it though  :’’’’’’’’’’’’’’’’’D : maichancreating: 「弥勒」I don’t exactly know how I ended up here but I think I gave Miroku the wrong power, guys lmao.  Originally, I was gonna have the wind tunnel peep through Miroku’s glove thing as the beads unravelled, but I thought it would darken the piece up too much since, you know, a black hole that consumes all things in its wake is not exactly the greatest light source for a dramatic piece like this.  So instead, I put a lightning stringy thing flying about because I liked the movement and Miroku’s canon black hole did not help me in lighting composition  :’’’’’’D Hope you guys still like it though  :’’’’’’’’’’’’’’’’’D 

maichancreating: 「弥勒」I don’t exactly know how I ended up here but I think I gave Miroku the wrong power, guys lmao.  Originally, I was g...

Save
sonneillonv: violent-cisbian: lesbianplayinanimalcrossing: violent-cisbian: thevirginmaryswomb: radcybergoth: blackswallowtailbutterfly: ryderdai: the-pump-king: morphimus: charlesoberonn: charlesoberonn: queen-of-dirt: charlesoberonn: notaboyscout: charlesoberonn: memory-thought: charlesoberonn: updogonline: It took me 3 watches to realize the door is cardboard and this man is not just freakishly strong. I assure you this is a standard interior door, usually only exterior doors are solid. You can see the inside of the cardboard though. This isn’t a real door, it’s a prop from a movie or TV set. it has a paper honeycomb for rigidity, and that’s how interior doors are made for modern construction in the USA. y'all have never kicked a hole in your bedroom door in a flurry of teenage hormonal rage and it shows If I kicked my bedroom door I’d more likely break my foot than the door. I always thought people punching through doors or shoving people through doors was just from the movies. Doors in my country are generally solid planks of wood, a polymer of sorts, or metal. American homes are made extremely cheaply and aren’t built to last. Steam from hot showers seeps into wall which are not treated to handle moisture, and mold grows in the walls. Almost every wall or floor is made out of plywood. Flimsy roofing that can withstand a run of the mill heavy storm, but not much more than that. Weak foundations that wouldn’t hold up at all if it weren’t for how light and plywood-y the overall house is. Not every American house is this shitty in all of these ways, but the vast majority of them are, and almost all of them have at least one of these problems. Even rich people’s homes. Read this article. https://dengarden.com/misc/American-Houses-and-Bad-Quality Then watch this video. Are we just ignoring this original post was about the OP looking for Elf Pussy or are we just totally past that? It’s already been answered that there is no elf pussy here, so why dwell? 🤷🏾‍♂️ I’m in Canada. I haven’t noticed any door be quite that flimsy. You could kick a hole in some of them (the hollow ones) but not right through, and not without hurting yourself. It also depends on how old your house is. My parents house is from the 80s and all the doors are solid wood Yeah my parents were the first people to live in our house so it would have been built in the same decade. I remember my mom saying that she liked how the doors were solid wood, and little me was confused bc I thought all doors were made of wood do y'all,,,, not have stone walls,,,,? No we don’t, usually just plywood or plasterboard with wooden frames for support. If it is stone it’s usually just a “feature wall” that is made of the aforementioned materials but with a thin layer of stone glued on. Basically this but just with paint over the plasterboard, American houses (or at least new ones) are built to look nice but ware easily. why would anyone build something like that? didn’t the pig with the wood house get killed or something? don’t y'all learn from your childhood? I live in AZ and one of my exterior doors is Styrofoam. Literally Styrofoam with a flexible plastic plate over it. You could kick right through it.  Or, if you felt like sneaking in and murdering me, cut through it with a kitchen knife.   Needless to say I’m having it replaced. -laughs in solid wooden door-: sonneillonv: violent-cisbian: lesbianplayinanimalcrossing: violent-cisbian: thevirginmaryswomb: radcybergoth: blackswallowtailbutterfly: ryderdai: the-pump-king: morphimus: charlesoberonn: charlesoberonn: queen-of-dirt: charlesoberonn: notaboyscout: charlesoberonn: memory-thought: charlesoberonn: updogonline: It took me 3 watches to realize the door is cardboard and this man is not just freakishly strong. I assure you this is a standard interior door, usually only exterior doors are solid. You can see the inside of the cardboard though. This isn’t a real door, it’s a prop from a movie or TV set. it has a paper honeycomb for rigidity, and that’s how interior doors are made for modern construction in the USA. y'all have never kicked a hole in your bedroom door in a flurry of teenage hormonal rage and it shows If I kicked my bedroom door I’d more likely break my foot than the door. I always thought people punching through doors or shoving people through doors was just from the movies. Doors in my country are generally solid planks of wood, a polymer of sorts, or metal. American homes are made extremely cheaply and aren’t built to last. Steam from hot showers seeps into wall which are not treated to handle moisture, and mold grows in the walls. Almost every wall or floor is made out of plywood. Flimsy roofing that can withstand a run of the mill heavy storm, but not much more than that. Weak foundations that wouldn’t hold up at all if it weren’t for how light and plywood-y the overall house is. Not every American house is this shitty in all of these ways, but the vast majority of them are, and almost all of them have at least one of these problems. Even rich people’s homes. Read this article. https://dengarden.com/misc/American-Houses-and-Bad-Quality Then watch this video. Are we just ignoring this original post was about the OP looking for Elf Pussy or are we just totally past that? It’s already been answered that there is no elf pussy here, so why dwell? 🤷🏾‍♂️ I’m in Canada. I haven’t noticed any door be quite that flimsy. You could kick a hole in some of them (the hollow ones) but not right through, and not without hurting yourself. It also depends on how old your house is. My parents house is from the 80s and all the doors are solid wood Yeah my parents were the first people to live in our house so it would have been built in the same decade. I remember my mom saying that she liked how the doors were solid wood, and little me was confused bc I thought all doors were made of wood do y'all,,,, not have stone walls,,,,? No we don’t, usually just plywood or plasterboard with wooden frames for support. If it is stone it’s usually just a “feature wall” that is made of the aforementioned materials but with a thin layer of stone glued on. Basically this but just with paint over the plasterboard, American houses (or at least new ones) are built to look nice but ware easily. why would anyone build something like that? didn’t the pig with the wood house get killed or something? don’t y'all learn from your childhood? I live in AZ and one of my exterior doors is Styrofoam. Literally Styrofoam with a flexible plastic plate over it. You could kick right through it.  Or, if you felt like sneaking in and murdering me, cut through it with a kitchen knife.   Needless to say I’m having it replaced. -laughs in solid wooden door-
Save