🔥 Popular | Latest

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. : honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame.

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canister...

Save
caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. a word of caution about the plywood though… I just reblogged a post earlier today saying that if a rubber bullet hits that and shatters it, the splinters can put you in more danger. depending on how you’re holding it up, it can also damage your arm if you’ve strapped it on somehow, and carrying a shield can make you a target for them to shoot things at, so it might actually be safer on the whole if you don’t try to construct a shield, counter intuitive though that may seem. It’d be a shame if I reblogged this and people read it: caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. a word of caution about the plywood though… I just reblogged a post earlier today saying that if a rubber bullet hits that and shatters it, the splinters can put you in more danger. depending on how you’re holding it up, it can also damage your arm if you’ve strapped it on somehow, and carrying a shield can make you a target for them to shoot things at, so it might actually be safer on the whole if you don’t try to construct a shield, counter intuitive though that may seem. It’d be a shame if I reblogged this and people read it

caitas-cooing: wendell-or-something: honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves...

Save
honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame. : honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas canisters and if this got shared to all those protesting… Would be a further shame if people started covering cameras (as seen in Hong Kong, with protestors using poles and rakes to lift cardboard boxes over security cameras), blinding drone optics with laser pointers, and flooding police-run reporting apps with junk data. It would be a shame if the protesters noted that plainclothes cops can be identified a number of ways, such as wearing steel-toed boots; an armband or wristband of a particular color; driving white, black, or dark blue cars with concealed lights; or having the outline of cuffs visible in the back pocket or the bumps of an armor vest’s shoulder straps under their shirt. It would be a shame if the protesters began making their signs out of inch-thick plywood to stop rubber bullets, forming a tight shield wall to prevent police from singling out and mobbing individual protesters. It would be a shame if the people behind the shield wall held up umbrellas so that tear gas canisters fired over the heads of the front line will be bounced away. It would be a shame if protesters began constructing improvised armor vests out of duct tape, hardback books, and ceramic tiles. It would be a shame if protesters started wearing safety glasses, hard hats, respirators, and gardening gloves, all of which can be found at the same hardware stores as the plywood. It would be a shame if they started using traffic cones (the kind without the hole in the top) upside-down buckets, or other improvised lids to contain tear gas by placing them over the canisters. It would be a shame if protesters learned that police scanners are legal to own in the US, allowing them to learn where police are moving and what routes they intend to take. It would be a shame if they discovered that these scanners can be used to send as well as receive, allowing them to flood the scanner frequencies with noise. All this would be a terrible, terrible shame.

honestmerchantsailor: passivity: Would also be really annoying if they wore heat resistant gloves to throw back the hot tear gas caniste...

Save
the-devils-dandy: emaciatinq: the-festive-edson: Hey there frends- I know a lot of you out there are struggling to acquire binders, and while you’re waiting to get one you might need an alternative. Ace bandages can be pretty hazardous to your health, so I thought I’d share my binding method with you. It came about out of necessity (I’m not in a position where I can buy myself a commercial binder,) but it’s comfortable and works great. I use it everyday and pass so well, at this point I’m not even looking into commercial binders anymore.  Hope this helps some of you.  ok but like you could reblog things like this for your transboy followers who may not be able to afford to buy a binder so that they can pass as male . … ……. Holy shit you are an absolute god : SIMPLE CAMISOLE BINDER - Comfortable everyday binding for trans*, genderfluid, and non-binary folks, brought to you by thefandomedson. We all know that binding with Ace bandages is dangerous and can even ruin our chances for HE surgery later on, but what's your alternative F47-AU when you don't have a binder? thefandomedson.tumblr.com Read on, dear friend. SNDNNANG Disclaimer: I'm not a doctor so I'm not going to say this is 100% safe only to be blamed or sued later on, but it's not as constricting as a typical binder so I don't see how it can really harm you. It's just a regular article of clothing that's been turned around and folded. As always though, it's safest to bind with a legitimate binder that's been made specifically to flatten your chest without harming your body Also: Obviously I'm just one guy and what works for me might not work for someone else. For most of you, this is only meant to be a temporary solution until you can get a real binder. As you can see from the reference pictures, I'm not very large chested. I'm usually a B with fluctuation into A or C, depending. So I honestly don't know how well this will work for those who are more endowed. Try it for yourself before writing it off, though. A safe partial bind is better than an unhealthy bind or no bind at all Reference: regular bra vs. cami-binder Make sure your cami has a built-in bra. That elastic is what's gonna help us bind. So, what're you gonna need for this binder? One thing. A camisole. The simple style made to be worn under other clothes is best, with no stitching, seams, beads, or other adornment (same shirt) across the chest. It also needs to have a built-in bra to bind effectively. I normally wear a small in women's clothing, but for a slightly tighter fit I went with an extra small cami. A size or so smaller will give a better bind, NOTE: this binder isn't meant to get your chest perfectly flat. Even cismen have a contour to their chests due to the development of pectorals. A cami-binder will mimmic a typical man's pectoral muscles but even with smaller sizes it shouldn't be uncomfortably tight or difficult to put on when worn normally. STEP 1: TURN THAT SUCKER AROUND That's right, folks. We're wearing our cami backwards for this binder. It might feel odd at first but you get used to it fast Sliders Sliders There are multiple reasons to do this. One of them is to put the little sliders are in the front, as they tend to stand out a lot on your back- especially in tighter clothes. And, obviously, having conspicuous straps won't help you pass Shorten the little slider things as much as you comfortably can, so that everything will be right up high where you need it. STEP 2: GET THINGS SITUATED Position the elastic of the built-in bra over your breasts, where ever itll flatten them most (it'll likely be right across your nipples.) The reason we've turned it around is that this built- in panel is shorter on the back side, which will help keep the elastic in the position we put it in. In the front, the panel is designed to fit over your breasts and with the extra fabric it'll ride down to do just that, which kills your bind. Also, the extra fabric bunches up weirdly if you wear it front-ways. STEP 3: ROLL IT UP Fold the fabric over itself however many times you need to. I find that twice works well We're rolling it for a couple reasons: Reason 1 is that camis stay close to your body and will retain a surprising amount of heat, especially under other layers of clothing. So rolling it keeps the fabric off your skin and keeps you cooler. Reason 2 is that the extra layers of fabric over your breasts even out your bind and help flatten things a little more That's it! Smooth out any major wrinkles in the fabric (use a mirror to check your back, as that often folds wrong when you roll it), and then put on your regular clothes over it. It's as easy as that Be sure that your straps aren't twisted. A twist will show up pretty easily under a t-shirt, and straps won't help you pass Happy binding! TED (Note: If you're having a trouble getting a good bind, even try two camis over each other. The second one will add a little more bind without adding too much bulk. Make sure it's still comfortable to breathe and move around in. the-devils-dandy: emaciatinq: the-festive-edson: Hey there frends- I know a lot of you out there are struggling to acquire binders, and while you’re waiting to get one you might need an alternative. Ace bandages can be pretty hazardous to your health, so I thought I’d share my binding method with you. It came about out of necessity (I’m not in a position where I can buy myself a commercial binder,) but it’s comfortable and works great. I use it everyday and pass so well, at this point I’m not even looking into commercial binders anymore.  Hope this helps some of you.  ok but like you could reblog things like this for your transboy followers who may not be able to afford to buy a binder so that they can pass as male . … ……. Holy shit you are an absolute god
Save
vorpalgirl: nonedecidemyfate:lavendrmenace:Men: Don’t look like a trash canWomen: “Look pretty enough to show you’re a woman” because the only thing that matters to be a woman is to be beautiful, also “covered enough to look like a lady” because showing your shoulder will make every man in the audience simaltaneously ejaculate and it will be a big mess. Also if someone stares at your tits and not your face, it’s your fault and you should be ashamed of yourself and your disgusting, lustful body.Jesus Christ on a Double Standard Bicycle. So if anybody wondered why the young ladies on tumblr who are still having to put up with this shit complain about it at the top of their lungs…yeah. Yeah, this would be why,: Dress code guidelines for the Scholastic Achievement Assembly Gentlemen: Dress pants, dress shoes, shirts, ties (jackets optional). No facial hair, no earrings. Be classy. Ladies: Think modesty. Your outfit should attract attention to your achievements, not your body. Choose an outfit that is pretty enough to show you are a woman and covered enough to show you are a lady. Skirts and dresses should be no shorter than your fingertips when your arms are at your sides. Check for modesty in your skirt both standing and sitting. If your hemline draws towards your waist when you sit down, it may not be modest in a sitting position. If in question, wear tights or leggings underneath. Tops: Shirts should draw attention to your face, not your chest. No tops that strapless or have spaghetti straps. Your shoulders must be covered. If yourt has straps, wear a sweater or shrug over the top. Shoes: Dress shoes. If you would wear them to the beach they are not dress shoes. Be cautious of high heels as you will need to process in to the gym. vorpalgirl: nonedecidemyfate:lavendrmenace:Men: Don’t look like a trash canWomen: “Look pretty enough to show you’re a woman” because the only thing that matters to be a woman is to be beautiful, also “covered enough to look like a lady” because showing your shoulder will make every man in the audience simaltaneously ejaculate and it will be a big mess. Also if someone stares at your tits and not your face, it’s your fault and you should be ashamed of yourself and your disgusting, lustful body.Jesus Christ on a Double Standard Bicycle. So if anybody wondered why the young ladies on tumblr who are still having to put up with this shit complain about it at the top of their lungs…yeah. Yeah, this would be why,
Save